Furniture Paint Booths

Industrial Paint Booths Automotive Paint Booths Large Equipment Booths Truck-R.V. Paint Booths Open Face Spray Booths Paint Booth Air Makeup Furniture and Cabinets Paint Booths Paint Preparation Booths Open Face Booths Call / Email / Quote

Home / Furniture Paint Booths

Furniture Paint Booths

Open Face

Open face booths offer the convenience of easy access. They are ideal for applications in which fume control, odor control, or overspray control are desired and/or required. We can make open face booths with crane slots for use with overhead crane systems or with conveyor openings for use with different types of material handling and material conveyance equipment.

We offer booths with HEPA air systems to move air back into the shop after being filtered as well as booths that exhaust to the outside of the building. Booths exhausting to the outside of the building may require air makeup units to replace the air exhausted by the booth. We can also provide an air makeup system to replace the air exhausted by your booth if your application requires exhausting to the outside of your building.

We offer standard furniture open face booths in a variety of sizes, 8' Tall, 10' Tall, and 12' Tall. Standard widths run from 4' to 20'. Standard depths run from 5' to 15'. We can also fabricate a booth to your exact custom dimensions for your specific application.

Enclosed

Enclosed booths completely isolate the work area from the rest of your facility. Basic crossdraft booths have filtered front doors. The air comes in through the filtered doors moves through the work area and is drawn though a filtered exhaust plenum at the rear of the booth and to the outside of the building through exhaust duct. Some applications may allow for using booths with HEPA air systems to move air back into the shop after being filtered. Exhausting inside or outside is determined by the chemical properties of what is being used in the booth along with the amount used per application period.

Booths exhausting to the outside of the building may require air makeup units to replace the air exhausted by the booth. We can also provide an air makeup system to replace the air exhausted by your booth if your application requires exhausting to the outside of your building. We can also connect an air makeup sysytem directly to an intake plenum on a booth to provide a system that is a "closed loop". Air comes directly from outside the building trhough the air makeup unit which is connecting by ducting directly to the intake plenum on the booth. This allows for having a cure or bake cycle for your booth and also allows for control the pressure in the booth.

Paint Booth Construction

Panels – Pre-Punched on 6” Centers:

Panels are fabricated from 18-gauge prime quality G-90 galvanized steel. Panels are fastened together with nuts and bolts for maximum rigidity and ease of assembly. Holes are precision CNC punched on 6” centers. Pre-punched holes assure true panel alignment.You can assemble the booth structure yourself or have one of our experienced installation crews take care of the assembly.

Structural Support:

Beams and columns are fabricated from formed 10 Gauge Galvanized Steel or W6x9 Steel. Support is pre-punched to match corresponding panels. Support is placed on maximum 10' centers for added rigidity. Support columns anchor to a conrete foor with special concrete bolts selected for your facility concrete.

LED Illumination:

Lighting is provided by 48” long, LED type fixtures. Standard LED lighting provides low operational cost and low maintenance. The light fixtures are located throught the booth to provide clean even lighting. All fixtures are ETL listed and approved for their intended use and placement. Fixtures are supplied to accept either 120V or 277V power. 5 year limited warranty.

Product Doors:

Product entry doors shall be provided. Options for coil type roll up doors or standard swing type doors. These doors are provided with a closed cell foam rubber weather stripping seal about the perimeter and a neoprene rubber sweep seal at the threshold. The mounting hardware provided includes a panic type safety latch and four 9'' door pulls. Doors have a clear opening determined by your large equipment product requirements.

Personnel Access Doors with Window:

Personnel access doors are provided as a double wall 18-gauge galvanized steel unit sized at 36'' x 84” and are provided pre-hung in a heavy gauge steel frame ready for mounting to the spray booth. Mounting hardware includes a panic type safety latch and two 6'' door pulls.

Exhaust Fans:

Tube axial type duct fans specifically designed and constructed for use in paint booths and similar applications are provided for exhaust. Bearings are permanently lubricated and mounted in rubber isolators for smooth operation. The motor, drive and bearings are isolated from the exhaust air stream. Fan size and motor HP are determined by the size of the booth, system static pressure, and the required airflow to meet codes. Electric power - 208/230/460V/3PH/60HZ). Adjustable Drives.

Filtration:

Intake air filters: Rated by UL as Class 2 and are EPA registered as environmentally safe. Filters are self-supporting in an internal frame - 20'' x 20'' x 1''. Exhaust air filters are fiberglass paint arrestor pads made specifically for the collection of paint over spray. These filters are UL rated as Class 2. A filter holding grid is provided for each filter cell.

Code Compliance:

All of our paint booths are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Standard Number 33, as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of spray booths.

Air Makeup

Air Replacement - Heat and Cure

Our replacement air systems are designed to replace air exhausted from parts of the paint finishing process. They replace air exhausted from paint booths, grinding booths, chemical application booths, blast booths, and any other process that may be exhausting air out of your building.

We offer systems that interlock directly with exhaust fans and systems that sense changes in the building pressure as exhaust fans from different items come on and off. It will maintain a constant even pressure in your building. The burner only engages when the temperature is below your preset. During warmer months it provides fresh air directly through the blower.

Our heat and cure systems are designed to help you move your work through the process as quickly as possible. We offer a basic heat and cure system and another system with heat, flash, and cure modes. The flash mode allows you to dry the paint between coats. Works great for both solvent and water based paints.

We offer systems with full air flow in all cycles and systems that allow you to vary and preset the airflow for different cycles. Our variable airflow control systems give you precise control over the air flow when you are painting, flashing, and curing. Different tasks and different conditions require different airflow for optimum efficiency and quality.

VAV - Variable Air Volume Control System

Our paint booth air makeup variable air volume control systems give you precise control over the air flow when you are painting, flashing, and curing. This allows you to adjust for different types of paint ( solvent based, water based ), different sized pieces of work ( Go-Cart - SUV ), and different outside air conditions ( -10° F and 5% humidity - +95° F and 85% humidity ). The higher the humidity the greater the air flow required to efficiently flash or cure your paints.

Different tasks and different conditions require different airflow from the air makeup unit for optimum efficiency and quality. We offer the ability to flash and cure in the paint booth at 100% airflow and high temperatures. We can provide 100% airflow and a 120° F temperature rise over the outside air temperature. If it is 20° F outside our system can provide 100% airflow at 140° F. Most systems in the industry can only provide these temperature rises at 50% air flow.

This system allows you to control how much air is used by the air makeup unit allowing you to control operational costs as well. System includes Variable Frequency Drives for both intake and paint booth exhaust volume control. Includes Programmable Digital Control Panel.

AB - Automatic Booth Pressure Balancing

The air makeup Automatic Balancing System speeds up or slows down the exhaust fan to keep the pressure balanced in the paint booth and the airflow at a proper speed. Set the pressure desired in the booth and the system will automatically adjust the speed